FEEDBACK

x

CALL ME

New Rental Used 

x

Live Chat

x

773E

Designed for performance, designed for comfort, built to last.
Would you like to Rent or Buy New / Used?

Operator Station

Control ease and comfort maximize productivity
Ergonomic Controls at the Operator's Fingertips
The ROPS/FOPS cabin has electric power window, electro-hydraulic hoist lever, trainer’s seat, front brake cut-off switch, backlit LED gear numbers, and optional heater and air conditioner. The hoist lever is electro-hydraulic and fingertip actuated, providing low impact body-down snubbing.
Electronic Monitoring System (EMS) - Critical Data in Three Separate Displays
(1) Four-gauge cluster - coolant temperature, oil temperature, brake air pressure, fuel level (2) Tachometer, digital speedometer, actual gear indicator (3) Message center module
Contour Series Air Suspension Seat and Tilt-Telescoping Steering Wheel
Standard and fully adjustable, including an adjustable right-hand armrest. Steering wheel's ergonomic grip improves comfort and control. Low effort steering system and foot-operated retarder reduce operator fatigue. Turn signal lever includes high beam actuator and electric windshield wiper controls.
Visibility in an Integral, Quiet ROPS/FOPS Cab
Exceptional all-around viewing area reduces fatigue and improves operator confidence and productivity. Cab is resiliently mounted and sound-suppressed for a quiet, protected work environment, and is radio-ready.
Truck Production Management System (TPMS) (Optional) Provides Payload and Cycle Time Data
  • Cat technology uses strut pressure sensors and on-board processors to determine payload weight.
  • Consistently accurate payloads improve efficiency by minimizing overloading and underloading.
  • On-board computer stores 1,400 cycles of payload weight, cycle times, distances and more.

Power Train - Engine

Cat 3412E Turbocharged engine with a HEUI™ fuel system
Cat 3412E Air-to-Air After Cooled Diesel Engine
The four stroke design uses long power strokes for complete fuel combustion and optimum efficiency. High displacement/low speed rating extends engine life and meets China Nonroad Stage II Emissions Standards.
Engine
1) Valve Rotators 2) Turbocharger 3) Stellite-Faced Valves 4) Steel-Backed, Copper-Bonded Bearings 5) Oil Cooler 6) Forged Crankshaft 7) Adjustment-Free, Fuel Injection Pumps 8) Hydraulic Injectors 9) Forged Steel Pistons 10) Full-length, Water-Cooled Cylinder Liners
40 Percent Torque Rise Means Faster Cycle Times
High lugging force during acceleration and less downshifting on grade or rough underfoot conditions. Also effectively matches gear shift points for maximum efficiency.
3412E Power and Reliability Features
  • High pressure injection
  • Full electronic control
  • Copper-bonded crankshaft bearings
  • Hardened crankshaft journals
  • Dry-type, radial seal air cleaners (primary, secondary elements, precleaner)
HEUI™ Delivers Excellent Fuel Control
Electronically monitors operator and machine inputs to optimize engine performance. Independently controls injection pressure, timing and duration over the engine operating range. Rate shaping technology modifies the heat release characteristics of the combustion process for significant decreases in sound and exhaust emission levels.
Electronic Control Module (ECM)
The ECM monitors key functions and logs critical indicators. The Electronic Technician can access this diagnostic information for easier maintenance and repair.

Power Train - Transmission

The Cat transmission gets the job done smoothly and quickly.
1) Lock-up Torque Converter Extends Transmission Life and Increases Operator Comfort
High rimpull and cushioned shifts with direct drive's efficiency and performance.
  • Engages at approximately 6.9 km/h (4.3 mph), delivering more power to the wheels
  • Quickly releases / re-engages during shifts, maintaining power wind-up
2) Cat Seven-Speed, Power Shift Transmission
A modulating pressure valve regulates clutch pressure to ease clutch engagement, reducing shock loads.
  • Patented rotating clutch pressure seals minimize drag losses and improve reliability
  • 35 percent gear splits between all gears match Cat engine design for optimum use of engine power with minimized shifting and torque converter use
  • Matched with the 3412E engine for constant power over a wide range of operating speeds.
  • Seven speeds forward, one reverse; second through seventh gears are direct drive
  • First gear has both torque converter drive and direct drive
3) Final Drives
Final drive and differential torque multiplication of 17.48:1 further reduces stress on the drive train.
Axles, Wheel and Rims
Full floating axles are shot-peened to relieve internal stresses and increase durability. Rolled splines also provide increased service life. Cast rear wheels and center-mount rims are mounted using studs and nuts for maximum reliability.

Engine/Power Train Integration

Combining engine control module (ECM) with the transmission controller
Integrating Systems Improves Performance
Electronic control of the engine and transmission improves efficiency, lowers operating costs and extends machine life.
Cat Data Link
Integrates machine computer systems:
  • Controlled Throttle Shifting regulates engine speed during shifts to reduce driveline stress, and deliver smoother shifts and longer component life.
  • Economy Shift Mode modifies engine maps for lower fuel consumption.
  • Directional Shift Management regulates engine speed during directional shifts to prevent damage.
  • Elevated Idle Neutral Coast Inhibitor helps prevent shifts to neutral at speeds above 6.5 km/h (4 mph).
  • Body-up Shift Inhibitor helps prevent transmission shifts above a preprogrammed gear without the body fully lowered.
  • Event Memory stores operational data for Electronic Technician access. Data includes:
- Shift histograms - Operator-induced events - Lock-up clutch counter - Machine/Transmission overspeed
Electronic Technician (Cat ET)
Accesses engine and transmission data stored by the Cat Data Link System, and displays the status of all engine parameters.
Cat Electronic Monitoring System (EMS)
Displays information on request, and alerts the operator to abnormal conditions with a three-category warning system.
Optional Attachments
  • Automatic Retarder Control (ARC) automatically controls retarding on grade, maintaining ±2,230 rpm.
  • Traction Control System (TCS) improves performance in poor underfoot conditions by electronically monitoring and controlling wheel slip.
  • Integrated Brake Controller (IBC) combines ARC and TCS, reducing electronic components and electrical lines.

Oil-Cooled, Rear Disc Brakes

Rear braking lets the operator concentrate on the haul road.
Brakes
1) Parking/Secondary Piston, 2) Service/Retarding Piston, 3) Friction Discs, 4) Steel Plates, 5) Actuating Springs, 6) Cooling Oil In, 7) Cooling Oil Out
Multiple Disc Brakes - Exceptional, Fade-Resistant Braking and Retarding
Cat multiple disc brakes use continuous forced oil-cooling. The optional ARC and TCS utilize the oil-cooled rear brakes to enhance truck performance and increase productivity.
Oil-Cooled Rear Disc Brakes
Designed and built for reliable, adjustment-free operation providing superior performance and service life in comparison to shoe-type and dry-disc systems. The system combines service, retarding and parking brake functions in a single unit. If hydraulic system pressure drops below a certain level, the spring applied secondary piston automatically applies the brake.
Oil Film Prevents Direct Contact Between Discs
Absorbing the braking forces by shearing oil and carrying heat away, this design extends brake life.
Secondary Braking
Spring-applied, hydraulically released, oil-cooled disc brakes are located on the rear axle. The front brakes will activate as part of the secondary system, even if switched out of service.
Parking Brakes
Spring-applied, hydraulically released parking brakes use wet disc brakes in the service system. A toggle switch activates the parking brake.
Pistons
A Caterpillar patented, two-piston design combines the service, secondary and parking brakes, along with retarding functions.

Integrated Braking Control (IBC)

Combines benefits of Automatic Retarding and Traction Control System
Automatic Retarder Control (Optional)
The ARC electronically controls braking on grade to maintain approximately 2,230 rpm (engine rpm is adjustable from 2,150-2,300 rpm in increments of 10 rpm). ARC is deactivated when the operator applies the brakes or throttle.
Engine Overspeed Protection
With the accelerator depressed and/or ARC turned off, ARC will automatically activate at 2,475 rpm to help avoid potentially destructive and often costly engine overspeeds.
Traction Control System (Optional)
Senses if rear wheel slip exceeds the set limit, and automatically applies rear brakes to slow the spinning wheel.
Operator Awareness
An on-dash indicator shows the operator that TCS is engaged.
Differential Action
Utilizes normal differential action to provide superior maneuvering in poor underfoot conditions. Also reduces tire scuffing as compared to positive lock differentials used on other systems.
Torque
TCS divides torque equally to reduce stress created on final drives and axles when torque is transferred to one side.
System Back-up
Should sensors fail, the normal differential action is still available to maintain control and steering.

Truck Body

Rugged body for varying applications
Designed To Handle a Variety of Material Densities.
Maximum payload in 3-5 passes with matched Cat loader in material over 1700 kg/m³ (2,900 lb/yd³).
Truck Body Features
  • Sidewall and floor junctions use five-sided beams to resist impact loads and hauling stresses
  • Box-section beams increase durability in the floor, sidewalls, top rail, corner and cab canopy areas
  • 400 Brinell Steel wear surfaces provide excellent wear resistance and are easily cold welded
  • Two-stage hoist cylinders raise in 9.5 seconds, lower in 12.5 seconds
  • Standard Body comes exhaust heated with options including a full-time muffler or exhaust diverter
  • Custom attachments include tail end liner, sideboards and more, to help ensure rated payload.
Dual-Slope Body Delivers Lowest Cost-Per-Ton
Efficient in most construction and mining applications, but excels on rough haul roads and steeper grades.
Body Floor Construction
  • 8° "V" Bottom - Centers loads, lowers the center of gravity, increases retention, reduces shock loads
  • 18° Ducktail and 9° Forward Body Slope - retains loads on 15% grade
  • 12° Single Slope - Excellent wear characteristics and uniform dumping into hoppers, crushers and feeders.

Structures

The backbone of the Cat off-highway truck
Box-Section Design
The 773E frame uses 20 castings in high stress areas with deep penetrating and continuous wrap-around welding. Mild steel provides flexibility, durability and resistance to impact loads even in cold climates.
Rollover Protection Structure (ROPS)
The ROPS attaches securely to four castings welded into the frame.
Frame Features Include:
  • Integral front bumper and front box beams for suspension cylinder and ROPS suppor
  • Box-section rear crossmember for body and ROPS support with attachment points for maintenance platform and rear engine hood hinge suppor
  • Castings provide additional strength in critical stress area
  • Mild steel plates (290 MPa [42,000 psi] minimum yield strength) and castings (241 MPa [35,000 psi] minimum yield strength) provide flexibility, durability and easy field maintenance
  • Castings provide additional strength in critical stress areas
Box-Section Frame Simplifies Access to Power Train Components
Open design reduces overall removal and installation time, lowering repair costs. Repairs can be made without preheating in ambient temperatures above 16° C (60° F) using readily available welding supplies.
Suspension System Dissipates Haul Road and Loading Impacts
Four independent suspension cylinders absorb shocks. Rear cylinders allow axle oscillation and absorb bending and twisting stresses. Front cylinders act as steering kingpins, for maneuverability and reduced maintenance.

Serviceability/Customer Support

Cat Dealers offer their total commitment to customer support.
Improved Serviceability and Machine Availability
Allows 30-50% faster engine service (changing most oil and filters). Improves service scheduling, allows servicing during normal work hours and reduces total engine service time.
Machine Platform
The machine platform provides access to the air tanks, brake master cylinder and make-up tank; engine oil level; air filters; steering hydraulic tanks; and battery compartment.
Ground Level Battery Disconnect
On-Board Diagnostics
Off-Board Diagnostics
Radial Seal Filters
Easy to change, radial seal filters reduce air filter maintenance times.
Vertical, Spin-On Filters
Simplified servicing and the elimination of spillage are benefits of vertical, spin-on filters.
Quick Coupler Pressure Taps
Sealed Electrical Connectors
Machine Management Service
Cat dealers help manage equipment investments with:
  • Vehicle systems analysis to help match the right machine to the job
  • Preventative maintenance programs
  • S•O•S oil analysis and technical analysis programs
  • Repair option analysis
  • Training for operators and mechanics
  • TPMS data analysis
Parts Availability
The Caterpillar worldwide computer network locates parts instantly to minimize machine downtime.
Literature Support

Systems / Applications

The 773E is designed for versatility.
Machine Configuration Options
Tire Options
Attachments
System Approach
Cat Product Analysis Team (PAT)
Loader Match

Standard Equipment

Air cleaners, dry-type, radial seal, primary and secondary elements
Air horn, electric
Air line dryer
Alternator, 50-amp
Auxiliary jump start receptacle
Backup alarm
Batteries, 12V (2), low maintenance
Battery disconnect switch, ground level
Body mounting group
Brakes -
  • Caliper disc (front)
  • Oil disc (rear)
  • Parking
  • Secondary
Brake (front) disconnect switch
Brake heat exchanger
Brake release motor, for towing
Cab, ROPS -
  • Cat Contour Series air suspension seat
  • Coat hook
  • Cup holder
  • Insulated and sound-suppressed
  • Radio ready
  • Storage compartment
  • Sun visor
  • Tinted glass
Crankcase guard
Diagnostic connection port, 24-volt
Drive line guard
Electrical system, 24-volt
Electronic Monitoring System
Filters, spin-on
Gauges -
  • Actual Gear Indicator
  • Air pressure
  • Brake oil temperature
  • Coolant temperature
  • Fuel
  • Hour meter, electric
  • Odometer
  • Speedometer
  • Tachometer
Hoist lever, fingertip-actuated
Lighting system -
  • Backup light
  • Dome/courtesy light
  • Hazard and directional signals, LED
  • Headlights, halogen, with dimmer
  • Stop/tail lights, LED
Mirrors, right and left
Power port, 24-volt
Precleaner
Reservoirs (separate) -
  • Brake/hoist
  • Steering
  • Transmission/torque converter
Retarder
Rock ejectors
Seatbelts, retractable
Seat, passenger
Service platform, bolt-on
Starting, electric
Steering, automatic supplemental, electric
Steering wheel, padded, tilt, telescopic
Tires, 24.00-35, radial
Tow hooks, front
Tow pin, rear
Transmission -
  • electronically controlled automatic power shift with downshift/reverse shift inhibitor, neutralizer during dumping, neutral start switch, engine overspeed protection, directional shift management, programmable top gear, body-up shift limiter, economy shift mode and control throttle shifting
Vandalism protection locks
Window, electric power (operator)
Windshield wipers and washer, electric intermittent

Operating Specifications

Nominal Payload Class (100%) 61.0tons
Top Speed - Loaded 38.6mph
Body Capacity - Struck 34.8yd3
Steer Angle 31.0Degrees
Turning Circle Clearance Diameter 82.0ft
Body Capacity - SAE 2:1 46.0yd3
Turning Diameter - Front 72.2ft
Raise Time 9.5Seconds
Lower Time 12.5Seconds

Engine

Engine Model Cat® 3412E
Rated Engine Speed 2000.0RPM
Gross Power - SAE J1995 710.0hp
Net Power - SAE J1349 672.0hp
Net Power - Cat 672.0hp
Flywheel Power 672.0hp
Net Power - 80/1269/EEC 672.0hp
Net Power - ISO 9249 672.0hp
Net Power - DIN 70020 681 PS
Number of Cylinders 12
Torque Rise 40.0%
Bore 5.4in
Stroke 6.0in
Displacement 1649.0in3
Peak Torque 2533.0lb ft

Weights - Approximate

Target Gross Machine Operating Weight 219000.0lb
Chassis Weight 66579.0lb
Body Weight 20304.0lb

Capacity - Dual Slope - 100% Fill Factor

Struck 34.8yd3
Heaped 2:1 (SAE) 46.0yd3
Heaped 3:1 42.4yd3
Heaped 1:1 56.6yd3

Weight Distributions - Approximate

Front Axle - Empty 47.3%
Front Axle - Loaded 33.3%
Rear Axle - Empty 52.7%
Rear Axle - Loaded 66.7%

Transmission

Forward 1 6.2mph
Forward 2 8.6mph
Forward 3 11.7mph
Forward 4 15.7mph
Forward 5 21.2mph
Forward 6 28.5mph
Forward 7 38.6mph
Reverse 8.1mph

Final Drives

Differential Ratio 3.64:1
Planetary Ratio 4.8:1
Total Reduction Ratio 17.48:1

Brakes

Brake Surface - Front 216.0in2
Brake Surface - Rear 9496.0in2
Brake Standards ISO 3450: 1996

Service Refill Capacities

Fuel Tank 185.0gal
Cooling System 32.0gal
Differentials and Final Drives 41.0gal
Steering Tank 9.0gal
Steering System (Includes Tank) 16.0gal
Torque Converter / Brake / Hoist Hydraulic Tank 35.0gal
Brake / Hoist System (Includes Tank) 81.0gal
Torque Converter / Transmission System (Includes Sump) 19.0gal
Crankcase 18.0gal
Torque Converter/Transmission System 14.0gal

Body Hoists

Pump Flow - High Idle 130.0gal/min
Relief Valve Setting - Raise 2500.0psi
Relief Valve Setting - Lower 500.0psi
Body Raise Time - High Idle 9.5Seconds
Body Lower Time - Float 12.5Seconds
Body Power Down - High Idle 17.51Seconds

Suspension

Effective Cylinder Stroke - Front 5.2in
Effective Cylinder Stroke - Rear 5.9in
Rear Axle Oscillation 8.1Degrees

Approximate Weights - Dual Slope

Chassis 66579.0lb
Body 20304.0lb
Standard liner 8600.0lb
Front axle - empty 47.3%
Front axle - loaded 33.3%
Rear axle - empty 52.7%
Rear axle - loaded 66.7%
Gross vehicle 219000.0lb

Steering

Turning Diameter Front Wheel Track 72.18ft
Turning Diameter - Front 72.18ft
Steering Standards Steering Standards Meets SAEJ1511 FEB94 and ISO 5010:1992
Steer Angle 31.0Degrees
Turning Circle Clearance Diameter 82.02ft

Dimensions

Height - Top of ROPS 13.12ft
Overall Body Length 28.0ft
Inside Body Length 21.0ft
Overall Length 31.5ft
Wheelbase 13.75ft
Rear Axle to Tail 9.13ft
Ground Clearance 1.94ft
Dump Clearance 2.22ft
Loading Height - Empty 12.38ft
Inside Body Depth - Max 5.92ft
Overall Height - Body Raised 28.83ft
Operating Width 16.8ft
Centerline Front Tire Width 10.74ft
Engine Guard Clearance 2.2ft
Overall Canopy Width 14.43ft
Outside Body Width 12.8ft
Inside Body Width 12.0ft
Front Canopy Height 14.51ft
Rear Axle Clearance 1.94ft
Centerline Rear Dual Tire Width 9.6ft
Overall Tire Width 14.62ft

Tires

Standard Tire 24.00-R35 (E4)

ROPS

ROPS/FOPS Standards Standards Meets SAE J1040 May94 and ISO 3471:1997

Sound

Sound Standards Meets SAE J88 APR95