An overall height that is a shade less than 2m and an ability to rotate within its own envelope make the CAT Steer Skid Loader 216B3 a great choice at constricted work environments.
The 216B3 steer skid cat carries a number of features that enable it to score very highly, especially on urban construction projects. Being hydrostatic, all the 216B3's wheels get power and this gives it the traction to handle ramps between floors. The 216B3 also scores over forklifts with which it can work on both flat and uneven soil surfaces.
Pilot-operated joystick levers allow fatigue-free operation of the skid steer loader. It has a higher load lifting capacity with a load-sensing piston pump that varies the flow according to the demand. A foot throttle that can be used to adjust the engine's RPM and a patented cooling package design keeps the hydraulic temperature low. Easy access to daily service points makes this a highly productive machine.
The CAT 216B3 offers aggressive functions at a high fuel efficiency rate! Get in touch with GMMCO now to know more and purchase or rent this mean machine!
Additional auxiliary controls with fingertip control of many work tool functions will be provided by the optional deluxe joysticks. This also includes proportional work tool hydraulics and electrical work tools. The basic and deluxe joystick functions also include one-touch continuous auxiliary hydraulic flow and momentary auxiliary hydraulic flow.
To get the most out of your machine, you will need to have the ability to change the work tools fast. And, the quick coupler system enables just that!
The standard quick coupler features manual engagement and disengagement of work tools using two high leverage handles. And, the optional hydraulic quick coupler allows the operator to quickly change tools without leaving the cab.
|Engine Model||Cat® C2.2|
|Net Flywheel Power||47.0hp|
|Gross Power SAE J1995||51.0hp|
|Net Power EEC ISO 9249||47.0hp|
|Net Power SAE 1349||47.0hp|
|Rated Operating Capacity||1400.0lb|
|Rated Operating Capacity w/Optional Counterweight||1500.0lb|
|Breakout Force, Tilt Cylinder||4083.0lb|
|Length w/Bucket on Ground||127.0in|
|Length w/o Bucket||99.0in|
|Height to Top of Cab||77.0in|
|Vehicle Width over Tires||60.0in|
|Max Overall Height||146.0in|
|Bucket Pin Height at Max Lift||112.0in|
|Bucket Pin Height at Carry Pos.||8.0in|
|Reach at Max Lift and Dump||20.0in|
|Clearance at Max Lift and Dump||85.4in|
|Bumper Overhang - Rear Axle||38.0in|
|Maximum Dump Angle||40°|
|Turn Radius from Ctr - Rear||59.0in|
|Turn Radius from Ctr - Coupler||47.0in|
|Turn Radius from Ctr - Bucket||77.0in|
|Max. Reach w/Arms-Parallel||51.0in|
|Rack Back Angle at Max Height||81°|
|Loader Hydraulic Pressure||3335.0psi|
|Loader Hydraulic Flow||16.0gal/min|
|ROPS||SAE J1040 MAY94, ISO 3471:1994|
|FOPS||SAE J1043 SEPT87, ISO 3449:1992 Level I|
|FOPS Level II||SAE J231 JAN81, ISO 3449:1992 Level II|
|Travel Speed Forward||7.9mph|
|Travel Speed Reverse||7.9mph|
|Chain box, each side||1.6gal|