FEEDBACK

x

CALL ME

New Rental Used 

x

Live Chat

x
Buy Used Cat 950L Wheel Loader

LXX00206 Cat 950L Wheel Loader

  • camera
  • Mail
  • The 950L Wheel Loader is equipped with built−in proven technologies to meet your expectations for reliability, productivity, fuel efficiency, and a long service life. This machine provdes increased power; lock−up clutch torque converter in a 5 speed countershaft transmission delivering smoother shifts, faster acceleration, and increased travel speed; productive economy mode for maximum fuel savings. This machine delivers the reliability, durability, and versatility you’ve come to expect from a Cat machine.

    DURABILITY

    Tough countershaft powershift transmission and axles handle extreme applications.

    Improved hydraulic hose routing reduces potential hose wear.

    Full flow hydraulic filtration system with additional loop filtration improves hydraulic system robustness and component life.

    PRODUCTIVITY

    Engine power increased by approximately 22% improves machine performance and response (compared to H Series).

    Lock−up clutch torque converter, combined with lock−to−lock shifting, delivers smooth shifts, fast acceleration and speed on grade.

    High capacity torque converter results in greater digging efficiency.

    Z−bar linkage provides high breakout force at ground level.

    Optional high lift linkage offers increased hinge pin height to load more easily in a variety of applications.

    Easy−to−load Performance Series Buckets feature a wider mouth and curved side plates that improve material retention (fill factor) and decrease cycle times.

    Optional fully automatic traction control system (differential locks) improves performance in the pile and poor underfoot conditions.

    FUEL EFFICIENCY

    Up to 10% lower fuel consumption than H Series.*

    Power dense ACERT engine burns less fuel by providing power and torque when needed.

    Performance Series Buckets feature a longer floor that easily digs through the pile resulting in lower fuel consumption.

    Load sensing hydraulics result in proportional flow for implement and steering on demand.

    Standard productive Economy Mode provides maximum fuel savings with minimal productivity impact.

    *Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.

    EASE OF OPERATION

    New best−in−class operator environment provides unmatched comfort, visibility, and efficiency.

    Intuitive, ergonomic controls keep operators focused on their work.

    Optional new ride control system with dual accumulators provides excellent ride quality and lowers cab vibrations.

    SAFETY

    Excellent cab access with wide door and stair−like steps.

    Floor to ceiling windshield, large mirrors with integrated spot mirrors and rear vision camera provide industry leading all−around visibility.

    Robust, repositioned grab bars provide safe access to platforms.

    POWER TRAIN

    •Engine, Cat C7.1 ACERT − meets China Nonroad Stage III and India Bharat Stage III emission standards, equivalent to Tier 3 and Stage IIIA

    •Fuel priming pump (electric)

    •Fuel/water separator

    •Rain caps, engine air intake

    •Economy Mode (selectable)

    •Transmission, automatic countershaft power shift (5F/3R)

    •Torque converter, locking clutch with free wheel stator

    •Switch, transmission neutralizer lockout

    •Axles, open differential front and rear axles

    •Brakes, full hydraulic enclosed wet−disc with Integrated Braking System (IBS)

    •Brake wear indicators

    •Parking brake, disc and caliper
    HYDRAULICS

    •Hydraulic system, load sensing

    •Steering, load sensing

    •2V

    •Remote diagnostic pressure taps

    •Hoses, Cat XT

    •Couplings, Cat O−ring face seal

    •Hydraulic oil cooler (swing out)

    •Oil sampling valves

    ENGINE

    •UNITS: US METRIC

    •Displacement 7.01 l

    •Engine Model Cat C7.1 ACERT

    •Maximum Gross Power − 2,000 rpm − ISO 14396 − Metric 195 kW (265 hp)

    •Maximum Net Power − 2,000 rpm − ISO 9249 − Metric 185 kW (252 hp)

    •Net Power − ISO 9249 185.0 kW

    •Peak Gross Torque − 1,400 rpm − ISO 14396 1050.0 N•m

    •Maximum Net Torque − 1,400 rpm 984.0 N•m
    WEIGHTS

    •Operating Weight 18136.0 kg

    •Note Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.1 m3 general purpose bucket with BOCE.
    BUCKETS

    •Bucket Capacities 2.7−4.4 m3 (3.5−5.8 yd3)
    OPERATING SPECIFICATIONS

    •Breakout Force 152.0 kN

    •Static Tipping Load − Full 40° Turn − No Tire Deflection 11624.0 kg

    •Static Tipping Load − Full 40° Turn − With Tire Deflection 10926.0 kg

    •Note (1) For a machine configuration as defined under ?Weight.?

    •Note (2) Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
    TRANSMISSION

    •Forward − 1 6.9 km/h

    •Forward − 2 12.0 km/h

    •Forward − 3 19.3 km/h

    •Forward − 4 25.7 km/h

    •Reverse − 1 6.9 km/h

    •Reverse − 2 12.0 km/h

    •Reverse − 3 25.7 km/h

    •Forward − 5 39.5 km/h

    •Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm roll radius.
    HYDRAULIC SYSTEM

    •Hydraulic Cycle Time − Total 9.5 s

    •Implement Pump Type Variable Axial Piston

    •Implement System − Maximum Operating Pressure 27900.0 kPa

    •Implement System − Maximum Pump Output at 2,340 rpm 245.0 l/min
    SERVICE REFILL CAPACITIES

    •Cooling System 54.0 l

    •Crankcase 20.0 l

    •Differential − Final Drives − Front 43.0 l

    •Differential − Final Drives − Rear 43.0 l

    •Fuel Tank 275.0 l

    •Hydraulic Tank 125.0 l

    •Transmission 43.0 l
    SOUND

    •With Cooling Fan Speed at Maximum Value − Exterior Sound Power Level (ISO 6395:2008) 107.0 dB(A)

    •With Cooling Fan Speed at Maximum Value − Exterior Sound Pressure Level (SAE J88:2013) 75 dB(A)*

    •With Cooling Fan Speed at Maximum Value − Operator Sound Pressure Level (ISO 6396:2008) 72.0 dB(A)

    •Note (1) *Distance of 15 m, moving forward in second gear ratio.

    •Note (2) **For machines in countries that adopt the ?EU Directives.?

    •Note (3) ***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
    With Cooling Fan Speed at 70% of Maximum Value − Exterior Sound Power Level (ISO 6395:2008)** 104 LWA***

    •With Cooling Fan Speed at 70% of Maximum Value − Operator Sound Pressure Level (ISO 6396:2008)** 69.0 dB(A)
    ENGINE − TIER 3/STAGE IIIA EQUIVALENT

    •Emissions Tier 3/Stage IIIA
    BUCKET CAPACITIES

    •Bucket Range 2.7−4.4 m3 (3.5−5.8 yd3)
    DIMENSIONS − HIGH LIFT

    •Centerline of Rear Axle to Edge of Counterweight 2071.0 mm

    •Centerline of Rear Axle to Hitch 1675.0 mm

    •Ground Clearance 368.0 mm

    •Height − Top of Exhaust Pipe 3415.0 mm

    •Height − Top of Hood 2697.0 mm

    •Height − Top of ROPS 3446.0 mm

    •Hinge Pin Height at Carry Height 765.0 mm

    •Hinge Pin Height at Maximum Lift 4490.0 mm

    •Lift Arm Clearance at Maximum Lift 3794.0 mm

    •Maximum Width − Over Tires − Loaded 2822.0 mm

    •Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

    •Overall Length − Without Bucket 7428.0 mm

    •Rack Back − Carry Height 54 degrees

    •Rack Back − Maximum Lift 66 degrees

    •Rack Back at Ground 45 degrees

    •Tread Width 2140.0 mm

    •Wheel Base 3350.0 mm
    DIMENSIONS − STANDARD LIFT

    •Centerline of Rear Axle to Edge of Counterweight 2083.0 mm

    •Centerline of Rear Axle to Hitch 1675.0 mm

    •Ground Clearance 368.0 mm

    •Height − Top of Exhaust Pipe 3415.0 mm

    •Height − Top of Hood 2697.0 mm

    •Height − Top of ROPS 3446.0 mm

    •Hinge Pin Height at Carry Height 663.0 mm

    •Hinge Pin Height at Maximum Lift 3995.0 mm

    •Lift Arm Clearance at Maximum Lift 3410.0 mm

    •Maximum Width − Over Tires − Loaded 2822.0 mm

    •Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

    •Overall Length − Without Bucket 6939.0 mm

    •Rack Back − Carry Height 49 degrees

    •Rack Back − Maximum Lift 60 degrees

    •Rack Back at Ground 41 degrees

    •Tread Width 2140.0 mm

    •Wheel Base 3350.0 mm

    request_icon Request Form

     I have read the terms and conditions